Tru Face Line Corrector

Use after a Nu Skin cleanser and toner of your choice. Apply both morning and night to lines around the eyes, mouth and forehead. Follow with a Nu Skin moisturiser of your choice.

For optimal results, use Tru Face Line Corrector with ageLOC Galvanic Spa:

Attach the Focus Area Conductor to the device.

Step 1: Apply Tru Face Line Corrector to the lines and wrinkles you want to target. Apply to only one of these areas at a time. Make sure to leave a thin layer of product on the surface of your skin.

Step 2: Push the selection button until the number 3 is lit on the display. This application will take 5 minutes.

Pro Tip: When targeting multiple areas, you can use the five minutes for more than one area. Small application areas typically do not require more than one or two minutes each.

Step 3: Thoroughly wet hands with NaPCA Moisture Mist or water. Hold the device with a moistened hand while touching the chrome plate on the back and begin to slowly glide the conductor head over your skin.

Be careful to avoid sensitive areas like your eyes, eyelids, and lips.

The device will beep once, twice, or three times to indicate that it has automatically adjusted to your skin.

After this, your galvanic application has begun, and the device will beep every 10 seconds to indicate the unit is on and working, and every 5 seconds when your application is almost complete.

Step 4: When your galvanic application is over, the device will emit a long beep followed by two short beeps and automatically turn off. Repeat steps 1 through 3 for each targeted area. When finished with all applications, rub any remaining product into your skin and wipe any leftover product from the device with a damp towel.